Camera Microphone, EIVOTOR Mic-01 3.5mm Digital Video Recording Microphone for D-SLR Camera, Black

Price: [price_with_discount]
(as of [price_update_date] - Details)

[ad_1] Features:
Product Name: Microphone for Camera
Model: MIC-01
Material: ABS Plastic
Product Dimensions: 5.3 * 1.2 * 2.2in (Length * Width * Height)
Response: 30-15000Hz
Sensitivity: -40dB (0dB = 1 / VPa to 1 KHZ)
Cable Length: 7.9in
Output Impedance: 200 Ohm
Signal-to-noise Radio: 76dB (1 HKZ to 1 PA)
The longest level: 120dB to 1 HKZ Harmonic distortion in 1% or less)
Power supply: 3V DC
Type: MS (Mid -side) Stereo Wire
Power Requirement: 3V CR2
Battery Life: Approximately 800 hours (at room temperature, use of a 3V CRV lithium battery attached)
Compatible Model : for any other DSLR with 3.5mm MIC jack and standard shoe

Usage:
1. Tie will slide the adapter to connect to the camera attached to the slide microphone.
2.After confirming the closed camera, connected to the microphone L stereo mini plug the microphone input port of the camera.

Package included:
1 * Microphone (The camera is not included, this is for exposure only.)
1 * Battery
1 * User manual

Notice:
▶ If the microphone is placed next to the speaker, it can produce whistlers. If this has occurred, move the microphone away from the speaker or lower the speaker volume.
▶ Tape change mode selector settings may produce noise.
▶ The battery indicator on the microphone. When you open the lights and go out immediately to save battery power and avoid the effects of stray light shooting video. So please check the switch to confirm that the switch has been closed when you are not using it.
▶ The battery indicator on the power switch when a flash, it is being used, if the microphone turns on the power switch , seeing light power supply, this suggests that the battery is not enough, please replace the battery on time. ▶ Pickup Pattern: The pickup pattern (affecting the sound stage width) can be set to 90 or 120 depending on the sound.
▶ Special design: Specially designed for high sensitivity camera and condenser microphone to improve sound quality. recording.
▶ Sensitivity: -40 dB (0 dB = 1 V / Pa at 1 KHz) .The microphone is very sensitive, do not drop, bump, or bump.
▶ Compatible model: It is suitable for any other DSLR camera equipped with a 3.5mm MIC jack and a standard flash shoe
▶ Note: When you turn "off" on "On", the light will flash and then go off to save energy.This is the normal condition that the light will not be lit when it is turned on. When the light blinks for a long time or always flashes during use, indicating that the power supply is not sufficient and that the battery needs to be replaced on time. The microphone can be attached to the DV with the hole and microphone path. The stereo system MS allows a natural sound. Provides a stereo sound image with superb sharpness.

[ad_2]

Share on Google Plus

About joko doyong

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.